Here are some brief descriptions of some of the work we do.
For pictures of individual parts, please visit the online catalog and click on the model number. I will upload pic’s as I take them.
Series 40 Detroit/ Navistar International 530E Full heat exchanger kit
This is a great kit, smooth package. Very proud of everyone involved in its creation.
If interested, please give Ken McMahan a call at 1-941-504-5978.
I hope to have a small Yanmar engine in house soon, if so-I’ll certainly upload the pics
A customer could not find a source for this manifold, so he shipped it in and we duplicated it.
Old Ford Lehman Water Cooled Manifold New Ford Lehman Water Cooled Manifold
I hope to have a Perking 1004 engine in house shortly and I have a range 4 6.354 (6.354.4) in route to prototype a modular marine kit. Omitting the need for the $9000.00 manicooler!!!
Hino Turbo Chargers- The customer shipped in the original units for identification. Sourced out relatively cheap replacements all the way in Japan, small world….
Superior 8G825 Water Cooled Manifold built using an old, failed unit for a pattern.
This is the Guascor SF240TA, a hell of an engine, with our one piece water cooled manifold.
If interested please contact Warren with Reagan Equipment at1-800-237-3160
This is the John Deere 6081 Powertech Engine with our watercooled manifold.
If interested please contact Dale with Reagan Equipment at1-800-237-3160
Custom Water Jacketed Risers built for Klosterman Marine1-251-602-6765
Stainless Steel 316L exterior and Inconel 625 interior-built to last
This is a Volvo 1630 that Grant Pride co sent in to have the manifold redesigned to meet EPA regulations
An individual sent in a dry manifold and some outstanding pics of the engine so that we could build a water cooled manifold for his Kubota V2203E.
This is the redesigned interior for a Guascor center section. The turbo flange was extended one inch to allow for more clearance on the engine.
FDGM needed a Stainless water cooled manifold to replace the existing on theIF1308 Isotta Fraschini Engine.
A Cummins distributor required this Onan V549 to be duplicated and producable, Our model 366.
The Perkins 510 Stainless Steel Water Cooled Manifold and Riser, our models 565and 578.
Our manifold has its centerline pushed away from the engine approximately one inch.
This is a 316L stainless steel Perkins 6.354.4 water cooled turbo adapter. Our Model 579.
A customer sent in his dry Kubota V2203E manifold and some rather good pictures of the engine and seating surface itself.
We designed and built the water cooled manifold below.
Employees, like John pictured below, make it possible to provide you with quality, ingenuity and precision day in and day out.
They are relentless.
These may look like the regular Caterpillar D399 water cooled manifolds, but they are much more than that….
The manifolds pictured have a 316L stainless steel interior for the exhaust side. The manifolds were special ordered to withstand specific needs of our customer.
Highly corrosive and volatile exhaust products limited the original Caterpillar manifolds operability to a short life of 2-6 months.
Our customer installed our manifolds approximately three years ago and they are still up and running strong.
The US Navy required some rather large sound attenuation. The first two 316Lstainless steel mufflers are shown.
Mufflers-here are a couple of big boys built for a Power Generation Station.
H&S Marine Services (1-979-849-0191) brought us a new style Cummins 6BT 5.9LDodge Truck Engine (the new 24 valve) in need of a water cooled manifold. The biggest difference between the Old (<1999) and the New Style engine is that the new style has round exhaust ports where the old style has rectangular ports. We also extended the turbo mounting flange to add some much needed clearance between the block and the turbo. H&S Marine Services has propriety over this design so all inquiries should be directed to them.
New
Komatsu SA6170-Turbo originally bolted to the side of the OEM water cooled manifold. During short life cycle, vibration and the turbo’s own weight would shear the turbo mounting bolts. Cenac Towing contacted us to see what we could do.
Solution-Given the engine, we redesigned the manifold. we rotated the turbo so that the weight was supported by hidden interior gussets, paying close attention to the interior flow patterns. The flange that the turbo mounts to was also changed to handle more allowable stress. Harmonics and Moments of Inertia were subsequently changed to prolong manifold life. Cooling water headloss was actually decreased and flow was improved by the design. We doubled the amount of vents and drains to ensure proper dearation during initial startup. The air intake also had to be modified to account for the turbo shift. The manifold has been in the field some time now with no problems. If you would like something redesigned, please contact Mark Coulson at 1-251-928-1234 or marine.exhaust@gmail.com or markyall@comcast.net
We designed a stainless steel water cooled manifold for a ski-boat racing application. The first photo shows the manifold without the exhaust flanges connected, the second the flanges are present and the manifold is ready for shipment, the third is just a different view of the second.
Perkins 6.354 Dry Ells
SS 316L Sch 40 Pipe with spun cast marmon clamp flanges
Perkins 6.354 Wet Ells
SS 316L exterior water jacket, Inconel 625 interior exhaust runner with spuncast marmon clamp flanges
Chris Craft fresh water cooled riser for 8V53 Detroit. The original cast Aluminum riser was completely deteriorated around the exhaust outlet flange. We changed material to 316L SS and increased the material thickness.
Perkins 4.108 Wet Ell. I do not have the OEM# for this ell yet. As soon as I doI will include it in our Catalog.
Chris Craft Spray Cans. The customer brought in the original which was in pretty good condition.
We built a fixture and duplicated the part using heavy wall Stainless Steel316L.